SwitchPowerFail警报—AutoSupport 消息
状态信息
适用场景
- ONTAP 9
- 集群网络交换机
- NetApp集群交换机
- Broadcom 交换机
- Cisco 交换机
- 致电主页查看运行状况监控器进程cshm：SwitchPowerFail警报
事件摘要
当集群交换机的运行状态显示为FAILED时、系统会发送SwitchPowerFail警报。
验证
AutoSupport 消息
HA Group Notification (Health Monitor process cshm: SwitchPowerFail_Alert[Swtich Name/PowerSupply-1]) ALERT
EMS日志
event log show -severity * -message-name callhome*
[Node Name: mgwd: callhome.hm.alert.major:alert]: Call home for Health Monitor process cshm SwitchPowerFail_Alert[Switch Name/PowerSupply-1].
命令行
system health alert show -node <node name> -monitor cluster-switch -alert-id SwitchPowerFail_Alert
Node: Reporting Node Name
Monitor: cluster-switch
Class of Alert: SwitchPowerFail_Alert
Severity of Alert: Major
Probable Cause: Power_supply_failure
Probable Cause Description: "$(cluster_switch_power.psu-name)" on switch "$(cluster_switch_power.device)" is missing or is not operational.
Possible Effect: Power supply redundancy on switch "$(cluster_switch_power.device)" might be lost.
Corrective Actions: 1) Ensure that the power supply units supplying power to the switch are turned on.
2) Ensure that the power cord is securely connected to the power supply of the switch.
解决方法
- 验证是否已安装电源。
- 验证电源是否已通电。
- 如果确定电源存在故障、请予以更换。
- 对于Broadcom交换机、请联系 Broadcom 以获得帮助。
- 对于Cisco交换机、请联系 Cisco 以获得帮助
- 对于CN1610交换机、请联系NetApp技术支持 以获得帮助。
追加信息