FabricSwitchPowerFail_Alert—MetroCluster交换机AutoSupport消息
状态信息
适用场景
- ONTAP 9
- MetroCluster光纤通道交换机
事件摘要
如果光纤通道交换机运行状态报告为"Failed"、则会发送FabricSwitchPowerFail_Alert。
验证
AutoSupport 消息
HA Group Notification (Health Monitor process schm: FabricSwitchPowerFail_Alert[]) ALERT
EMS日志
::> event log show -severity * -message-name callhome*
[netapp-01: mgwd: callhome.hm.alert.major:alert]: Call home for Health Monitor process schm: FabricSwitchPowerFail_Alert[//].
::> event log show -severity * -message-name hm.alert.raised*
[netapp-01: schmd: hm.alert.raised:alert]: Alert Id = FabricSwitchPowerFail_Alert , Alerting Resource = // raised by monitor system-connect
命令行
::> system health alert show -node <node name> -monitor system-connect -alert-id FabricSwitchPowerFail_Alert
Node: Reporting Node Name
Monitor: system-connect
Class of Alert: FabricSwitchPowerFail_Alert
Severity of Alert: Major
Probable Cause: Power_supply_failure
Probable Cause Description: A power supply unit on the switch "Switch Name" is not operational.
Possible Effect: Power supply redundancy on switch "Switch Name" is lost.
Corrective Actions: 1) Check the error details by using the command "storage switch show -error -switch-name Switch_Name".
2) Identify the faulty power supply unit by using the command "storage switch show -power - switch-name Switch_Name".
3) Ensure that the power supply unit "Power Supply #1" is properly inserted into the chassis of the switch "Switch_Name" and fully operational.
解决方法
- 验证维护是否在AutoSupport自动通报时间戳期间进行或已计划维护。
- 验证数据中心内是否有电源问题描述。
- 验证电源是否正在接收 配电单元(PDU)的电源
- 验证电源是否安装正确且未松动。
- 拔下并重新连接电源线、以重新拔插电源线
- 如果可能、请重新拔插受影响的电源。
如果确认电源 有缺陷、请更换电源：
- 对于Brocade交换机，请联系 NetApp技术支持。
- 对于Cisco交换机、请联系 Cisco 以获得帮助。
追加信息