由于一条 SAS 连接丢失，系统显示单路径 HA
适用于
- FAS26x0
- FAS27x0
问题描述
- 板载 0a 或 0b SAS 端口处于离线状态，且 SAS 连接处于 Single path-HA 状态，来自
SYSCONFIG-A
System Storage Configuration: Single-Path HA
slot 0: SAS Host Adapter 0b (PMC-Sierra PM8070 rev. C, SAS, <OFFLINE (hard)>)
Firmware rev: 03.08.09.00
Base WWN: Base_WWN
Phy State: [4] Enabled, Rate unknown
[5] Enabled, Rate unknown
[6] Enabled, Rate unknown
[7] Enabled, Rate unknown
- Controller B 在
STORAGE-FAULT中显示为 CRITICAL
Vendor Unique Element 83-IOM12E: (SAS)
Element Status Status Bytes Status Descriptions
1 [IOM12E A] : OK 01,08,00,20 MASTER, RESERVED
2 [IOM12E B] : CRITICAL 02,80,00,E1 ADDITIONAL STATUS AVAILABLE, REFERENCE CLOCK FAULT, RESERVED, EXCEPTION DATA VALID, RESERVED