跳转到主内容

由于 SFP 故障,SFP 电源不足

Views:
3
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
hw
Last Updated:

适用于

  • ONTAP 9
  • AFF-A300

问题描述

  • Receiver signal average optical power 通过下面的 switch 命令为 low:

switch> show interfaces descriptions | match xe-0/0/2
xe-0/0/2     up   up   switch_e0e

switch> show interfaces diagnostics optics xe-0/0/2 | match dbm
   Laser output power             :  0.5720 mW / -2.43 dBm
   Receiver signal average optical power    :  0.0246 mW / -16.09 dBm

  • SYSCONFIG -A 报告相对网络端口关闭:

e0e MAC Address: d2:39:ea:b1:b5:3e (auto-unknown-fd-down)

  • 在系统上可以观察到以下消息:

[node01: intr: netif.linkDown:info]: Ethernet e0e: Link down, check cable.
[node01: vifmgr: vifmgr.portdown:notice]: A link down event was received on node node01, port e0e.

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.

 

  • 这篇文章对您有帮助吗?