由于Brocade交换机G620挂起、MCC正在过渡到单路径HA
适用场景
- ONTAP 9
- Brocade (G620)
- 光纤 MetroCluster
问题描述
- 集群已从四路径/多路径转换为混合路径
cluster::> system node run -node local -command sysconfig -a
NetApp Release 9.3P21: Mon Jan 11 12:28:03 EST 2021
System ID: 05xxxxxx32 (bylg-fdr-filer4-01)
System Serial Number: 7xxxxxxxxxxxx2 (node-01)
System Rev: A4
System Storage Configuration: Mixed-Path
System ACP Connectivity: Inband Active
All-Flash Optimized: false
- 从所有节点连接到交换机的FC端口均处于脱机硬状态
FC Host Adapter 2c was connecting to switch port “switch:6”
slot 2: FC Host Adapter 2c (Emulex XE201 rev. 48, <OFFLINE (hard)>)
Board name: 111-xxxxx
Serial Number: FCxxxxxx7
FC Host Adapter 0g was connecting to switch port “switch:2”
slot 0: FC Host Adapter 0g (QLogic 8324 rev. 2, N-port, <OFFLINE (hard)>)
Firmware rev: 8.7.0
Flash rev: 5.0.2
Host Port Id: 0x50200