主页
内部部署
ONTAP 9
MetroCluster
MetroCluster KBs
Cisco MDS 与 Brocade 交换机之间的命令映射

Cisco MDS 与 Brocade 交换机之间的命令映射

最后更新
另存为PDF

Views:: 225

Visibility:: Public

Votes:: 2

Category:: not set

Specialty:: MetroCluster

Last Updated:

适用场景

光纤 MetroCluster
Cisco
Brocade

问题解答

端口命令：

Brocade	Cisco MDS
`portCfgShow`	`show interface`
`portCfgSpeed [slotnumber/]portnumber, mode`	`config t interface fcXX/XX switchport speed XX (XX=1000 for 1GB, 2000 for 2GB and Auto for auto-negotiate)`
`portDisable [slotnumber/]portnumber`	`config t interface fcXX/XX shutdown`
`portErrShow` `portStatsShow`	`show interface`
`portPerfShow`	`show interface counters brief`
`portShow`	`show interface brief`
`portStatsClear`	`clear counters interface fcXX/XX`
`trunkShow` `trunkDebug`	`show interface trunk vsan XX`
`switchshow`	`show flogi database` `show interface brief`
`sfpshow -all`	`show interface transceiver details`

基本分区命令：

Brocade	Cisco MDS
`zoneAdd zoneName, member;member`	`zoneset <zoneset_name> vsan XX zone <zone_name>`
`zoneCreate zonename, member; member`	`config t zone <zone_name> vsan XX`
`zoneDelete zonename`	`configt no zone <zone_name> vsan XX`
`zoneRemove zonename, zoneMemberList`	`config t zoneset <zone_name> vsan XX no zone <zone_name>`
`zoneShow`	`show zoneset show zone status`
`cfgCreate`	`config t` `zoneset <zoneset_name> vsan XX`
`cfgDelete`	`clear zone database vsan XX`
`cfgRemove`	`config t zoneset <zoneset_name> vsan XX no member <zoneset_name>`
`cfgDisable`	`no zoneset activate <zoneset_name> vsan XX`
`cfgEnable`	`zoneset activate <zoneset_name> vsan XX`
`cfgSave`	`copy running-config startup-config`
`cfgActvShow`	`show zone status`

其他命令：

Brocade	Cisco MDS
`supportshow` `supportsave`	`show tech-support` `show tech-support brief` `show tech-support details`
`errDump`	`show logging`
`errClear`	`clear logging logfile`
`errShow`	`attach module XX show port-config internal link-events show logging`
`chassisName`	`show switchname`
`chassisShow`	`show hardware`
`configDefault`	`write erase`
`configShow`	`show running-config` `show startup-config`
`configUpload`	`copy nvram:startup-config tftp://<ip-addr>/my-config`
`configDownload`	`copy tftp://ip-addr/my-config nvram:startup-config`
`date ate mmddhhmmyy`	`show clock clock set`
`fabricShow`	`show fcdomain domain-list vsan XX`
`reboot` `hareboot`	`reload`
`switchUptime`	`show system uptime`
`slotShow`	`show module`

追加信息

附加信息 _text