跳转到主内容

升级到FOS 9.1.x后、Brocade无法检查设备是否来自受支持的供应商

Views:
8
Visibility:
Public
Votes:
0
Category:
metrocluster
Specialty:
metrocluster
Last Updated:

适用场景

  • 光纤 MetroCluster
  • Brocade FC交换机已升级 到9.1.x
  • 交换机监控配置为使用SNMPv2。

问题描述

SNMP无法轮询Brocade交换机

Cluster01::> storage switch show -field switch-status,fw-version,switch-symbolic-name,switch-model,psu-status-list switch-name switch-symbolic-name switch-model fw-version switch-status -------------------- -------------------- ------------ ---------- ------------- Brocade_00.00.00.001 SWITCH01 BrocadeG620 v9.0.1c error Brocade_00.00.00.002 SWITCH02 BrocadeG620 v9.0.1c error Brocade_00.00.00.003 SWITCH03 BrocadeG620 v9.0.1c error Brocade_00.00.00.004 SWITCH04 BrocadeG620 v9.0.1c error SWITCH01 SWITCH01 v9.1.1b unknown SWITCH02 SWITCH02 v9.1.1b unknown SWITCH03 SWITCH03 v9.1.1b unknown SWITCH04 SWITCH04 v9.1.1b unknown 8 entries were displayed.

或在使用SNMPv2时在升级到FOS 9.1.x后添加到监控:

Error: command failed: Internal error. Failed to add switch for monitoring on node "node01" in cluster "cluster01".
Reason: Failed to check if device located at "192.168.10.1" is from supported vendor. For further assistance,
contact technical support.

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.