跳转到主内容

集群网络上的 Cisco 3132Q-V 交换机端口错误

Views:
Visibility:
Public
Votes:
0
Category:
fabric-interconnect-and-management-switches
Specialty:
HW
Last Updated:

适用场景

  • AFF A800
  • Cisco 3132Q-V交换机
  • Cisco NX-OS 7.0 (3) I6版

问题描述

  • 已向集群添加新节点并连接到此交换机
  • IFSTAT-A AutoSupport部分:
 -- interface e0a (24 days, 23 hours, 53 minutes, 23 seconds) -- RECEIVE Total frames: 27862m | Frames/second: 12902 | Total bytes: 165t Bytes/second: 76544k | Total errors: 113 | Errors/minute: 0 Total discards: 6 | Discards/minute: 0 | Multi/broadcast: 483k Non-primary u/c: 0 | CRC errors: 104 | Long frames: 0 
 
  • 在交换机端口上传输错误:
sw02# show interface Ethernet1/13
Ethernet1/13
is up
...
TX
40402074633 unicast packets  2136308 multicast packets  73603 broadcast packets
40404284544 output packets
113504536436442 bytes
13538642185 jumbo packets
4751 output error  0 collision  0 deferred  0 late collision
  • 中没有"输入错误"或CRC错误show tech support
  • 中的特定IntMacTX错误 sw02# show interface:

--------------------------------------------------------------------------------
Port          Giants SQETest-Err Deferred-Tx IntMacTx-Er IntMacRx-Er Symbol-Err
--------------------------------------------------------------------------------
mgmt0              0           0           0           0           0          0
Eth1/1/1           0          --           0           0           0          0
...
Eth1/13            0          --           0       2628           0          0
Eth1/14            0          --           0       2029           0          0
...

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.