跳转到主内容

由于 FC 主机布线不正确而导致 E-Series 主机冗余丢失警报

Views:
4
Visibility:
Public
Votes:
0
Category:
e-series-santricity-os-controller-software
Specialty:
esg
Last Updated:

适用于

  • NetApp E 系列
  • SANtricity OS
  • 所有FC端口已启动

问题描述

  • Recovery Guru 在 SANtricity System Manager 中显示 Host Redundancy Lost

  • Loss of host-side connection redundancy detected 通知已送达
  • RECOVERY-GURU-PROCEDURES.HTML 显示 ALB_HOST_REDUNDANCY_LOST

Failure Entry N: ALB_HOST_REDUNDANCY_LOST-Recovery Failure Type Code: 475
Storage array: <STORAGE_ARRAY>
Affected host: <HOST>
Affected controller: Controller in bay <A/B>
End of Failure Entry 1: Back to top

  • STORAGE-ARRAY-PROFILESTATE-CAPTURE-DATA 指示主机上的 2 个 FC 端口正在连接到单个控制器
    • STORAGE-ARRAY-PROFILE > HOST-TO-VOLUME ASSIGNMENTS显示主机有2个FC端口
             Host:               <HOST>                
              Host type:           Windows (clustered or non-clustered)  
              Interface type:         Fibre Channel              
                Host port identifier:    <FC_WWPN_1>
                Alias:           <ALIAS_1>              
                Host port identifier:    <FC_WWPN_2>
                Alias:           <ALIAS_2>               
              Data Assurance (DA) capable:  Yes                   
              Large sector size supported:  No                   
    • STATE-CAPTURE-DATA > ionShow > tditnall 0从单个控制器显示上述2个FC端口正在连接

...TDITN..:...................................Initiator.....................................:..........IOs..........:........Busy.........Idle
 tditn Ch : Location            Device Name             Port Name  Seq : Open  Completed  Errs :      Ms       Ms
------ -- :--------- -------------------------------- -------------------------------- ---- :----- ---------- ----- :------------ ------------
..
   4  2 : <ALIAS_2>        2000f4c7aa0a471f         <FC_WWPN_2>     6 :   0      12    0 :    2356058       0
..
   6  3 : <ALIAS_1>        2000f4c7aa0a46f7         <FC_WWPN_1>     4 :   0     1567    0 :    2356058       0

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.