E28xx 缓存备份设备状态失败，更换后异步失败

最后更新
另存为PDF

Views:

Visibility:: Public

Votes:: 0

Category:: e-series-systems

Specialty:: hw

Last Updated:

适用于

E-Series E28xx 存储阵列
SANtricity 操作系统 11.50.2P1

问题

缓存备份设备状态失败：

Controller in Shelf 99, Bay A

     Status:            Online

     Cache Backup Device
       Status:          Failed
       Type:            SATA flash drive
       Location:          Controller A, Connector SATA 1
       Capacity:          8,192 MB
       Product ID:         Sxxxxxxxxxxxx
       Part number:        Not Available
       Serial number:       Sxxxxxxxx
       Revision level:       FW11
       Manufacturer:        Xxxxx
       Date of manufacture:    Not available

更换控制器 A 后，无法正常工作。

FIRMWARE INVENTORY
  Storage Array
    Report Date:                1/1/70, 12:00:00 AM UTC
    Storage Array Name:            xxxxxxxxx
    Current SANtricity OS Software Version: 11.50.2P1
     Management Software Version:      11.52.0000.9007
     Controller Firmware Version:      08.52.00.01
     Supervisor Software Version:      08.52.00.01
     IOM (ESM) Version:           11.52.0G00.0001
    Current NVSRAM Version:          N280X-852834-D02
    Staged SANtricity OS Software Version: None
    Staged NVSRAM Version:           None

  Controllers
    Location:                 Shelf 99, Bay A
    Current Firmware Version:         08.80.00.00 -------------> 新控制器固件异步失败。
    Current NVSRAM Version:          N280X-852834-D02
    Current Supervisor Software Version:    08.80.00.00
    Board ID:                 2806
    Manufacturer sub-model ID:         318

    Location:                 Shelf 99, Bay B
    Current Firmware Version:         08.52.00.01
    Current NVSRAM Version:          N280X-852834-D02
    Current Supervisor Software Version:    08.52.00.01
    Board ID:                 2806
    Manufacturer sub-model ID:         318