跳转到主内容

E系列驱动器已绕过—AutoSupport消息

  1. 最后更新
  2. 另存为PDF
Views:
6
Visibility:
Public
Votes:
0
Category:
e-series-systems
Specialty:
esg
Last Updated:

适用场景

NetApp E 系列

事件摘要

SANtricity会在 Failure Entry 1: BYPASSED_DRIVE-Recovery Failure Type Code: 64Recovery Guru中报告一个条目。

验证

  1. 登录到SANtricity Storage Manager或SANtricity System Manager
  2. 验证是否 Failure Entry 1: BYPASSED_DRIVE-Recovery Failure Type Code: 64 已报告
  3. 从 硬件 页面验证磁盘是否显示为已绕过

解决方法

对于单个驱动器

  1. 将绕过的驱动器卸载2分钟
  2. 重新拔插驱动器
  3. 如果驱动器仍处于未通过 状态、请联系NetApp技术支持、因为这需要进一步进行故障排除或更换部件。

适用于多个驱动器和/或全新系统

  1. 请从以下任何知识库文章中进行验证、以了解后续步骤：

追加信息

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.