跳转到主内容

EF600 控制器在非正常驱动器故障后重新启动

  1. 最后更新
  2. 另存为PDF
Views:
3
Visibility:
Public
Votes:
0
Category:
e-series-santricity-storage-manager
Specialty:
esg
Last Updated:

适用于

NetApp E-Series
  • EF600
    • 11.90 - 11.90R5

    问题

    • 驱动器进入旁路状态：
    • 控制器在驱动器故障事件期间重新启动，导致数据库受到影响
    在日志中观察到以下错误：
    PCISERRException
    PCI-EDeviceStatus=0x0004****FatalErrorDetected
    PCI-EAERUncorrectableStatus=0x00004000****CompletionTimeoutStatus
    PCI-EXPGlobalStatus=0x00000001****PCIEAERFatalError
    FatalErrorDetected: AERR_FATAL error was detected. We treat this as fatal and reboot

    Sign in to view the entire content of this KB article.

    New to NetApp?

    Learn more about our award-winning Support

    NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.