跳转到主内容

NIC 端口在 IFstat 中看到 CRC 错误

Views:
32
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

适用场景

  • FAS/AFF 系统
  • 网络适配器

问题描述

  • ifstat ONTAP 命令在受影响的端口上显示较高的 CRC 错误。

示例:

 -- interface e4a (7 hours, 33 minutes, 13 seconds) -- RECEIVE Total frames: 10739k | Frames/second: 395 | Total bytes: 14537m Bytes/second: 534k | Total errors: 4947 | Errors/minute: 11 Total discards: 0 | Discards/minute: 0 | Multi/broadcast: 334k Non-primary u/c: 0 | CRC errors: 4921 | Runt frames: 0 Fragment: 0 | Long frames: 0 | Jabber: 0 No buffer: 0 | Xon: 0 | Xoff: 0 Pause: 0 | Jumbo: 1645k | Noproto: 0 Error symbol: 0 | Illegal symbol: 26 | Bus overruns: 0 Queue drops: 0 | LRO segments: 8397k | LRO bytes: 14247m LRO6 segments: 0 | LRO6 bytes: 0 | Bad UDP cksum: 0 Bad UDP6 cksum: 0 | Bad TCP cksum: 0 | Bad TCP6 cksum: 0 Mcast v6 solicit: 0 
  • 更改问题描述中的 SFP 后,此 SFP 将被清除 端口
  • EMS 在下方报告错误

示例:

[?] Mon Apr 26 19:51:11 JST [Node-02: vifmgr: vifmgr.cluscheck.crcerrors:alert]: Port e0a on node Node-02 is reporting a high number of observed CRC errors.

 

 
 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.
Scan to view the article on your device