跳转到主内容

FAS8300/FAS8700/AFF-A400 启动失败

Views:
37
Visibility:
Public
Votes:
0
Category:
fas-systems<a>2008501441</a><a>1308150</a>
Specialty:
hw
Last Updated:

适用场景

  • AFF A400
  • FAS8300
  • FAS8700

问题描述

  • 系统可能无法  开机自检并进入加载程序提示符。
  • BIOS停留在重置循环中、如下所示:

BIOS Version: 16.3
PEI start.
CPU PEI initialization.
Wait BMC self-test result.
BMC self-test: OK.
UPI initialization.
CPU initialization.
Running full memory initialization.
CPU reset.
BIOS Version: 16.3
PEI start.
CPU PEI initialization.
Wait BMC self-test result.
BMC self-test: OK.
UPI initialization.
CPU initialization.
BIOS Version: 16.3
PEI start.
CPU PEI initialization.
Wait BMC self-test result.
BMC self-test: OK.
UPI initialization.
CPU initialization.
Running full memory initialization.

  • 在此状态下、BMC仍可完全正常运行、并可通过Ctrl-G远程访问或从串行控制台访问

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.