跳转到主内容

FAS2xxx端口e0a、e0b、e0M、e0P缺失、并显示"Invalid PCIe device detected"

Views:
75
Visibility:
Public
Votes:
1
Category:
fas-systems<a>FAS2500 系列</a><a>1211301</a><a>PCIe 设备</a><a>FAS25xx 无效</a>
Specialty:
hw
Last Updated:

状态信息

适用场景

  • FAS25xx、FAS22xx、FAS2750
  • 四通道千兆以太网控制器82580

问题描述

  • 节点重新启动时不显示崩溃消息。关闭前可能会显示以下消息:

Mon Jul  5 09:13:39 CEST [node_name:netif.hangDetected:warning]: Network interface e0b hung (PCIe RcvMstAdt). Resetting to recover. Driver: igb.
Mon Jul  5 09:22:13 CEST [node_name:netif.hangDetected:warning]: Network interface e0a hung (PCIe RcvMstAdt). Resetting to recover. Driver: igb.

  • 节点保持正常运行,但通过端口 e0a , e0b 和 e0M 在网络上停止响应。
  • 从控制台日志(system log 从 SP 或从控制台连接启动日志):

Mar 11 08:10:05 [XXX:pvif.allLinksDown:EMERGENCY]: ifgrp a0a: All links are down

kill: 85241: No such process
Terminated
.
Uptime: 311d17h23m44s

HALT:  HA partner has taken over (ic) on Wed Mar 11 11:54:45 CET 2020
ugen0.2: <Micron Technology> at usbus0 (disconnected)

System rebooting... <==== the system rebooted, but didn't panic
================ Log #1 end time Wed Mar 11 10:54:44 2020
================ Log #2 start time Wed Mar 11 10:55:10 2020


Invalid PCIe device detected below PCIe Root Port(Bus/Dev/Func): 00/1C/00 <== the BIOS is not able to recognize some components

Actual Vendor ID and Device ID:FFFF/FFFF

Expected Vendor ID and Device ID:8086/150E

Mezzanine Card ID(02 - 10GbE, 03 - FC, 07 - No Dev, others - Resv):07

BIOS is resetting system...

  • 如果节点可以启动,则端口 e0a , e0b , e0M 和 e0P 将完全丢失或在 Hardware Initialization Failedsysconfig 输出中报告:

slot 0: Internal 10/100/1000 Ethernet Switch     Status: Unknown
slot 0: Quad Gigabit Ethernet Controller 82580
     e0a MAC Address:   00:00:00:00:00:00 (Hardware Initialization Failed: IGB: 3)
     e0b MAC Address:   00:00:00:00:00:00 (Hardware Initialization Failed: IGB: 3)
     e0M MAC Address:   00:00:00:00:00:00 (Hardware Initialization Failed: IGB: 3)
     e0P MAC Address:   00:00:00:00:00:00 (Hardware Initialization Failed: IGB: 3)
slot 0: Interconnect HBA:   Mellanox IB MT25204

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.
Scan to view the article on your device