跳转到主内容

在ONTAP升级期间,节点无法执行交还

Views:
14
Visibility:
Public
Votes:
0
Category:
aff-series
Specialty:
hw
Last Updated:

适用场景

  • AFF A20
  • FAS 2720

问题描述

  • ONTAP升级过程中节点无法执行交还
  • 端口 e0a/e0b 显示为 down
  • 连接各节点的集群端口并进行环回测试,发现有一个节点的集群端口一直处于 Down 状态。
    (同一节点上的电缆 e0a > e0b 检查端口状态是否为在线)

NodeA:
::> net poor show 
(network port show)
Node: NodeA
Speed(Mbps) Health
Port    IPspace    Broadcast Domain Link MTU  Admin/Oper  Status
--------- ------------ ---------------- ---- ---- ----------- --------
a0a     Default    Service      up   1500    -/-    healthy
e0M     Default    Management     up   1500 auto/1000  healthy
e0a     Cluster    Cluster      up   9000  auto/10000 healthy
e0b     Cluster    Cluster      up  9000  auto/10000 healthy
e0c     Default    -         up   1500  auto/10000 healthy
e0d     Default    -         up   1500 auto/10000 healthy
e0e     Default    Snapmirror     up   1500  auto/1000  healthy
e0f           tempsnapmirror   down 1500  auto/- -

NodeB:
::> net port show 
(network port show)
Warning: Unable to list entries for vifmgr on node "NodeA": RPC:
Couldn't make connection [from mgwd on node "NodeB" (VSID: -1)to vifmgr at ****
Node: NodeB                          
Speed(Mbps) Health
Port    IPspace    Broadcast Domain Link MTU  Admin/Oper  Status
--------- ------------ ---------------- ---- ---- ----------- --------
a0a     Default    -         up   1500 auto/10000 -
e0M     Default    -         up   1500  auto/1000  -
e0a    Cluster    -         down 9000  auto/auto  -
e0b    Cluster    -         down 9000  auto/auto  -
e0c     Default    -         up   1500  auto/10000 -
e0d     Default    -         up   1500  auto/10000 -
e0e     Default    -         up   1500  auto/1000  -
e0f     -       -         down 1500  auto/auto -
8 entries were displayed.

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.