跳转到主内容

升级到 9.8 后,双托架磁盘卡在无限 SDC 环路中

Views:
5
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

适用场景

  • DS4486 存储架
  • ONTAP 9.8

问题描述

  • 升级到 9.8 后, DS4486 磁盘架上的多个磁盘报告 shm_setup_for_failure without any 特定发生原因:
Wed Feb 10 09:40:25 -0800 [nodeb: api_dpool_17: scsi.debug:debug]: shm_setup_for_failure disk 3a.20.7L1 (S/N ZC1xxxxx) error 40000000h
Wed Feb 10 09:40:25 -0800 [nodeb: api_dpool_18: scsi.debug:debug]: shm_setup_for_failure disk 3a.20.17L1 (S/N K7Hxxxxx) error 40000000h
Wed Feb 10 09:40:26 -0800 [nodeb: api_dpool_20: scsi.debug:debug]: shm_setup_for_failure disk 3a.21.20L2 (S/N ZC1xxxxx) error 40000000h
 
  • 之后,当托架中的一个磁盘被清空 / 发生故障时,同一托架中的另一个磁盘将经历一个状态不正常的磁盘复制环路,该环路永远不会超过 0% ,最终会自行取消:
 
RAID Disk Device          HA  SHELF BAY CHAN Pool Type  RPM  Used (MB/blks)    Phys (MB/blks)
--------- ------          ------------- ---- ---- ---- ----- --------------    --------------
dparity   0d.23.2L2       0d    23  2   SA:A   0 MSATA  7200 3748319/7676558720 3815447/7814037168
parity    3b.13.22L1      3b    13  22  SA:A   0 MSATA  7200 3748319/7676558720 3815447/7814037168
data      3a.20.19L1      3a    20  19  SA:B   0 MSATA  7200 3748319/7676558720 3815447/7814037168
data     3a.21.20L1      3a    21  20  SA:B   0 MSATA  7200 3748319/7676558720 3815447/7814037168 (evacuating, copy in progress)
-> copy   3a.21.16L2      3a    21  16  SA:B   0 MSATA  7200 3748319/7676558720 3815447/7814037168 (copy 0% completed)
 
  • EMS 日志中会显示以下消息:
 raid_lm: raidlm.carrier.evac.start config_thread: raid.rg.diskcopy.start config_thread: raid.rg.diskcopy.progress raid_lm: raidlm.carrier.evac.abort config_thread: raid.rg.diskcopy.aborted 
  • 示例:

[raid.rg.diskcopy.start:notice]: /nodea_aggr_vol0/plex0/rg0: starting disk copy from 3a.21.20L1 (S/N [PCJHxxx]) to 3a.21.16L2 (S/N [ZC1Dxxxx]). Reason: Disk replace was started..
raid.rg.diskcopy.progress:debug]: Disk copy progress from  (S/N PCJHxxxx) to  (S/N ZC1Dxxxx) is on disk block 0 and is 0%% complete after 0:00:00 (HH:MM:SS).
[raid_rg_diskcopy_aborted_1:notice]: params: {'target': '3a.21.16L2', 'duration': '3:13.16', 'source': '3a.21.20L1', 'reason': 'Source disk failed.', 'rg': '/nodea_aggr_vol0/plex0/rg0', 'owner': '', 'aggregate_uuid': 'f0f3c156-b7f6-4344-adce-249752a6fcf4', 'blockNum': '2156224'}
[raid.rg.diskcopy.start:notice]: /nodea_aggr_02/plex0/rg1: starting disk copy from 3a.21.20L1 (S/N [K4G5xxxx]) to 3a.21.16L2 (S/N [ZC1Dxxxx]). Reason: Disk replace was started..
[raid.rg.diskcopy.progress:debug]: Disk copy progress from 2.21.20.1 (S/N K4G5xxxx) to 2.21.16.2 (S/N ZC1Dxxxx) is on disk block 0 and is 0%% complete after 0:00:00 (HH:MM:SS).

[raid_rg_diskcopy_aborted_1:notice]: params: {'target': '3a.21.16L2', 'duration': '2:53.00', 'source': '3a.21.20L1', 'reason': 'Source disk failed.', 'rg': '/nodea_aggr_02/plex0/rg1', 'owner': '', 'aggregate_uuid': 'cd3fa773-6ba5-48f6-9872-8c4a7ed5ff6f', 'blockNum': '793024'}
[raid.rg.diskcopy.start:notice]: /nodea_aggr_vol0/plex0/rg0: starting disk copy from 3a.21.20L1 (S/N [PCJHxxxx]) to 3a.21.16L2 (S/N [ZC1Dxxxx]). Reason: Disk replace was started..
[raid.rg.diskcopy.progress:debug]: Disk copy progress from 2.21.20.1 (S/N PCJHxxxx) to 2.21.16.2 (S/N ZC1Dxxxx) is on disk block 0 and is 0%% complete after 0:00:00 (HH:MM:SS).

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.