移动卷显示错误： Preparing source volume for cutover ：重复数据删除尚未准备好进行卷移动转换

适用场景

• ONTAP 9
• OnCommand System Manager
• 正在运行 "" volume move"

问题描述

• 尝试在 System Manager 上移动卷时，出现以下错误。

示例：

The volume move operation of volume 'vol1' in Vserver 'vserver1' to destination aggregate 'aggr1' did not enter the cutover phase. The system provided the additional explanation: 'Preparing source volume for cutover: Deduplication is not ready for vol move cutover'. After a short delay, the volume move operation will reattempt cutover entry. The job ID for the volume move job is '1234'.

• ""volume move show 显示的结果如下所示。

示例：

cluster::> volume move show
Vserver  Volume   State   Move Phase       Percent-Complete Time-To-Complete
--------- ---------- -------- --------------------- ---------------- ------------------------
vserver1  vol1    healthy cutover_soft_deferred 98%        Sat May 23 20:02:53 2020

• 在 "volume move show -details " " 的结果中显示以下错误消息。

示例：

Detailed Status: Waiting to Cutover. (Preparing source volume for cutover: Deduplication is not ready for volmove cutover Sent)::Reason: 3.11TB Volume move job monitoring transfer of data.

• sis 日志文件（SIS-LOG.GZ 在 ASUP 中）显示如下错误。

示例：

Sat May 23 22:00:00 CST 2020 [Vserver UUID: 80dfdc3e-d89e-11e7-9c8d-00a098b8d178] /vol/vol1 [sid: 0] Error (A volume move operation is in progress. Use the "volume move show" command to view the status of the move. Retry this command when the move is complete. )

• 几分钟后mgwd.log，指示 "volume move " 成功。

示例：

Sat May 23 22:16:16 CST [node: mgwd: mgmt.vopl.move.done:notice]: The volume move job with ID '1234' on volume 'vol1' on Vserver 'vserver1' to destination aggregate 'aggr1' succeeded.