跳转到主内容

总线超限意味着什么?

Views:
7
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
nas
Last Updated:

适用场景

ONTAP 9

问题解答

  • 总线超限是 一个字段 ifstat <interface>
  • 总线溢出 会计算 适配器的接收FIFO (先进先出)缓冲区溢出和数据包被丢弃的次数
  • 当总线繁忙且适配器无法将数据传输到主机内存时,会发生此错误
  • 当存储系统 CPU 繁忙且无法足够快地处理收到的数据包时,也可能发生这种情况。
  • 出现总线超限时的建议
    • 监控计算机或最终用户是否报告访问问题
    • 如果有访问问题报告,并且数据包跟踪分析表明端口上的发生原因丢失,请与[1] 您的网络团队讨论如何在存储器和交换机端口上启用 L2 流量控制
      • 注意:在存储器端口上启用流量控制并不会自动意味着在已连接的交换机端口上启用流量控制
      • TR-4182流量控制最佳实践 建议如下
        • 在 Data ONTAP 集群中的集群网络端口上禁用流量控制。
        • 应将其余网络端口(提供数据,管理和集群间连接的端口)上的流量控制配置为与环境其余部分中的设置匹配。 
    • 减少 ONTAP 中的工作负载
NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.
Scan to view the article on your device