跳转到主内容

Brocade交换机端口上报告PCS错误、其中Rx和Tx孔在建议范围内

Views:
79
Visibility:
Public
Votes:
0
Category:
fabric-interconnect-and-management-switches
Specialty:
brocade
Last Updated:

适用场景

Brocade 交换机

问题描述

  • 在交换机端口上观察到PCS错误:
/fabos/cliexec/porterrshow : frames enc crc crc too too bad enc disc link loss loss c3timeout pcs uncor tx rx in err g_eof shrt long eof out c3 fail sync sig tx rx err err 172: 276 165 0 3 2 0 0 1 0 0 2 0 2 0 0 89.7m 0
  • TX和RX功率均在建议范围内: 

=============
Slot  5/Port 28:
=============
RX Power:   -6.9   dBm (689.9uW) ​​​​​​
TX Power:   -1.1   dBm (784.2 uW)

  •  2025/02/19-23:27:51 (IST), [MAPS-1003], 785375, SLOT 2 | FID 128 | PORT 6/47, WARNING, NTTC_X6_107_FAB1, slot6 port47.switch1.10.227.204.177.switch1, F-Port 6/47, Condition=ALL_HOST_PORTS(ITW/min>21), Current Value:[ITW, 512 ITWs], RuleName=defALL_HOST_PORTSITW_21, Dashboard Category=Port Health, Quiet Time=None."

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.