跳转到主内容

在Dell_DRAC_SystemStatus上、DRAC报告全局系统状态为5.0、从而使设备处于错误状态

  1. 最后更新
  2. 另存为PDF
Views:
8
Visibility:
Public
Votes:
0
Category:
element-software<a>2009454500</a>
Specialty:
solidfire
Last Updated:

适用场景

  • NetApp SolidFire SF系列节点
  • 集成的Dell远程访问控制器(iDRAC)

问题描述

在iDRAC UI上的"Storage Overview">"Physical Disks Overview"下
 
RAC0501: There are no physical disks to be displayed
1. Check if the host system is powered off or shutdown
2. Check if the physical disks are inserted into the enclosure or attached to the backplane
3. There are no out-of-band capable controllers detected
 
NetApp SolidFire Active IQ 中未显示任何其他警报、并且节点运行正常

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.