跳转到主内容

如何在连接到集群模式Data ONTAP 系统的NetApp E系列阵列上无中断地在主动-被动和ALUA故障转移模式之间切换

Views:
8
Visibility:
Public
Votes:
0
Category:
e-series-systems
Specialty:
esg
Last Updated:

 

适用场景

  • 集群模式 Data ONTAP 8
  • SAN
  • FlexPod
  • E 系列控制器固件 8.xx
  • V 系列

问题描述

从集群模式Data ONTAP 8.2.3开始、支持"NetApp (ALUA)"主机类型(主机操作系统)、建议将其与Data ONTAP E系列存储阵列结合使用。
注意:在E系列控制器固件8.25及更高版本中、Data ONTAP (RDAC)主机类型已弃用。在升级到8.25及更高版本之前、必须完成以下用于将E系列主机类型从RDAC更改为ALUA的操作步骤。

本文档的目标是提供无中断操作步骤 、以转换连接到集群模式Data ONTAP 系统的NetApp E系列阵列上的主机类型。在不遵循建议的操作步骤 的情况下更改主机类型可能会对提供数据的集群模式Data ONTAP 系统造成发生原因 中断。
您可以使用此无中断操作步骤 对连接到Data ONTAP 系统的E系列阵列执行以下操作:

  • 将Data ONTAP (RDAC)主机类型的现有配置切换为Data ONTAP (ALUA)主机类型
  • 将Data ONTAP (ALUA)主机类型的现有配置切换为Data ONTAP (RDAC)主机类型

注: 本文章中的‘Data ONTAP system '一词是指能够连接到
NetApp E系列阵列上存储阵列的V系列系统和FAS 系统。从固件版本08.10.15.00开始、支持ALUA主机类型。

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.