跳转到主内容

在固件升级期间 E 系列存储阵列上出现数据验证错误

  1. 最后更新
  2. 另存为PDF
Views:
30
Visibility:
Public
Votes:
0
Category:
e-series-systems
Specialty:
esg
Last Updated:

状态信息

适用于

  • 控制器平台：所有平台
  • 控制器固件：所有版本
  • SANtricity 版本：所有版本

问题

在升级前检查期间、 SANtricity 会报告以下一条或多条错误消息：

  • Data validation error: The storage array cannot be upgraded, as one or more host entries in Controller A did not match with those of Controller B.
  • The storage array cannot be upgraded, as the host port type representation in Controller A did not match with those of Controller B. Contact a technical support representative to resolve this issue.
  • [check spm database] An error occurred while checking the spm database on controller A.
  • [check internal data validity] Data validation error: You cannot upgrade the storage array until the problem is resolved. Contact your technical support representative to resolve this issue.

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.