What is meaning for Disk status was replaced with a star ico in Array Management?
- Last Updated:
E-Series SANtricity Storage Manager 11.30 & Prior versions
E-Series Controller firmware 08.30 & Prior versions
Disk status is replaced with a star ico in Array Management.
One disk has been failed manually and manual reconstruction has been performed, and then the operation of disk revive.The disk displays replaced status with a star ico in Array Management
Raid reconstruction is not completed, so the drive will stay in a replaced state until this completes.
Perform the following steps:
- Collect the latest Support Bundle,
- Check state-capture-data.txt -->vdmShowVGInfo(0,0,0,0,0,0,0,0,0,0)
- Find out the volume 7 with inactive drive:
Seq:8 / RAID 5 / VGCompleteState / TLP:F / DLP:F / SSM:T / ActDrv:7 / InActDrv:1 / VolCnt:1 / Secure:No
BlockSize:512 / LPE:0 / DBF:1 / PI Capable:T - 2 / Label:vol8 / VGWwn:60080e5000326df8000000a8541a2d27
(Active) Drive:0x122c2ba0 devnum:0x00010033 seqNum:1 Tray/Slot:99/52 State:Acc/GrA/Opt
(Active) Drive:0x122c3e20 devnum:0x00010034 seqNum:2 Tray/Slot:99/53 State:Acc/GrA/Opt
(Active) Drive:0x2cc15ee0 devnum:0x00010035 seqNum:3 Tray/Slot:99/54 State:Acc/IHS/Opt
(Active) Drive:0x122c6360 devnum:0x00010036 seqNum:4 Tray/Slot:99/55 State:Acc/GrA/Opt
(Active) Drive:0x122c7620 devnum:0x00010037 seqNum:5 Tray/Slot:99/56 State:Acc/GrA/Opt
(Active) Drive:0x122c88a0 devnum:0x00010038 seqNum:6 Tray/Slot:99/57 State:Acc/GrA/Opt
(Active) Drive:0x122c9b60 devnum:0x00010039 seqNum:7 Tray/Slot:99/58 State:Acc/GrA/Opt
(Inactive) Drive:0x122cc0a0 devnum:0x0001003b seqNum:3 State:Acc/GrA/Opt
Volumes: 0x00007 [O]
- Check the volume 7 in evfShowVol-->evfShowVol(7,0,0,0,0,0,0,0,0,0)
Background Task: COPY-BACK at block 0x00088fa4000 with 34% complete
Note: You might see the copy back or the reconstruction progress, which will always say 0% because the controller does not own that volume. The owner of the volume will show the progress.