volume_hot_spare_in_use 不会执行复制回
适用场景
- SANtricity OS 软件 1.71
- 控制器固件 08.71.03.00
问题描述
- 更换磁盘后不会进行复制。
- 更换磁盘后,数据驱动器的状态将保持 replaced 状态。
Drive at Shelf 99, Bay 7
Status: Replaced
Mode: Assigned
Raw capacity: 1,676.716 GB
Usable capacity: 1,671. 216 GB
World-wide identifier:
Associated volume group: HDD-RAID5
RECOVERY-GURU-PROCEDURES
显示VOLUME_HOT_SPARE_IN_USE
。
Failure Entry 1: VOLUME_HOT_SPARE_IN_USE- Recovery Failure Type Code: 21
Storage array: RabbitSAN
Volume group: HDD-RAID5
Status: Optimal
RAID level: 5
Failed drive at: shelf 99, bay 7
Service action (removal) allowed: No Service action LED on component: No
Replaced by drive at: shelf 99, bay 8
Volumes: HDD-RAID5
- 备用磁盘的模式为
Hot spare in-use
。
Drive at Shelf 99, Bay 8
Status: Optimal
Mode: Hot spare in-use
Raw capacity: 1,676.716 GB
Usable capacity: 1,671. 216 GB
World-wide identifier:
Associated volume group: HDD-RAID5
- RAID 组为
Optimal
。
Name: HDD- RAID5
Status: Optimal
Capacity: 5, 013.648 GB
Current owner: Controller in bay B
Quality of Service (QoS) Attributes
RAID level: 5
Drive media type: Hard Disk Drive
Drive interface type: Serial Attached SCSI (SAS)
Shelf loss protection: No
Secure-Capable: No
Secure- Enabled No
Data Assurance (DA) capable: Yes
DA enabled volume present: Yes
Total Volumes: 1
Thick volumes: 1
Repository volumes: 0
Free Capacity: 3.648 GB
Associated drives - present (in piece order)
Total drives present: 5
Shelf Bay
99 4
99 5
99 6
99 7
99 8 [hot spare drive is sparing for drive at 99, 7]