ONTAP Select：在新部署中、网络连接检查器快速检查失败
适用场景
- ONTAP Select
- 多节点部署
- VMware vSphere
问题描述
部署新的ONTAP Select集群快速网络连接检查程序失败、并显示：
An error occurred while performing a ping from host (192.168.0.6) to host2 (192.168.0.7) with all links up. Many network configuration issues can cause issue. Suggestions:
1. Verify that the host is connected to at least one uplink in the 'up' state.
2. Verify that the sending and receiving uplinks are part of the same VLAN.
3. Verify that the STP setting on the physical switch is correct.
The reccomended STP setting on the switch ports connected to the host host 'Edge/PortFast'
If a cluster has been deployed and subsequently reconfigured outside of ONTAP Select Deploy, run a refresh operation on the cluster, and then try again.