跳转到主内容

升级VMware后、ONTAP Select上出现HA互连问题

Views:
6
Visibility:
Public
Votes:
0
Category:
ontap-select<a>2009648969</a>
Specialty:
CORE
Last Updated:

适用场景

  • ONTAP Select
  • VMware vSphere vSwitch

问题描述

在VMware升级系统显示存储故障转移已禁用后:
 
Cluster1::> storage failover show
Takeover
Node           Partner        Possible State Description
-------------- -------------- -------- -------------------------------------
Clsuter1-01    Clsuter1-02    false    Connected to Clsuter1-02, Takeover is not possible: NVRAM log not synchronized
Clsuter1-02    Clsuter1-01    false    Connected to Clsuter1-01, Takeover is not possible: NVRAM log not synchronized
2 entries were displayed.
 
事件显示警报:

Cluster1::> event log show
Time                Node             Severity      Event
------------------- ---------------- ------------- ---------------------------
01/01/2000 12:00:00  Cluster1-01    ALERT         vifmgr.cluscheck.ctdpktloss: Continued packet loss when pinging from cluster lif Cluster1-01_clus1 (node Cluster1-01) to cluster lif Cluster1-02_clus2 (node Cluster1-02).

01/01/2000 12:00:01  Cluster1-01    ALERT         cf.takeover.disabled: HA mode, but takeover of partner is disabled due to reason : unsynchronized log.

 
对集群互连执行Ping操作失败:

Cluster1::*> cluster ping-cluster -node Cluster1-02
Host is Cluster1-02
Getting addresses from network interface table...
Cluster Cluster1-01_clus1 169.254.1.23 Cluster1-01 e0c
Cluster Cluster1-01_clus2 169.254.1.68 Cluster1-01 e0d
Cluster Cluster1-02_clus1 169.254.1.137 Cluster1-02 e0c
Cluster Cluster1-02_clus2 169.254.1.177 Cluster1-02 e0d
Local = 169.254.1.137 169.254.1.177
Remote = 169.254.1.23 169.254.1.68
Cluster Vserver Id = XXXXXXX
Ping status:
....
Basic connectivity succeeds on 4 path(s)
Basic connectivity fails on 0 path(s)
................
Detected 1500 byte MTU on 4 path(s):
Local 169.254.1.177 to Remote 169.254.1.23
Local 169.254.1.177 to Remote 169.254.1.68
Local 169.254.1.137 to Remote 169.254.1.23
Local 169.254.1.137 to Remote 169.254.1.68
Larger than PMTU communication fails on 4 path(s):
Local 169.254.1.177 to Remote 169.254.1.23
Local 169.254.1.177 to Remote 169.254.1.68
Local 169.254.1.137 to Remote 169.254.1.23
Local 169.254.1.137 to Remote 169.254.1.68
RPC status:
2 paths up, 0 paths down (tcp check)
2 paths up, 0 paths down (udp check)

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.