fcvi.qlgc.qpErr：在ONTAP端的存储端收到错误
适用场景
- ONTAP 9
- 光纤连接MetroCluster
- Brocade交换机
问题描述
- 在
EMS日志的NetApp End上出现以下错误消息。
Sun Aug 18 18:12:16 -0700 [node3: xxx_main1: fcvi.qlgc.qpErr:error]: FC-VI adapter: FCVI driver on port 0e received QP Error. QP name = Control, QP index = 0xf, VI state = Error(state code = 0x3), sub-error = Timeout occured on the QP exchange(error code = 0xe). Remote node's system id = 538145405. This error has occured 132 times.
disc c3端口的c3 timeout rx显示在Brocade交换机日志的porterrshow中。
porterrshow :
frames enc crc crc too too bad enc disc link loss loss frjt fbsy c3timeout pcs uncor
tx rx in err g_eof shrt long eof out c3 fail sync sig tx rx err err
0: 4.0g 1.4g 0 0 0 0 0 0 0 349.1k 0 0 0 0 0 0 846 0 0
- SFP Rx和TX值在
sfpshow输出中处于最佳范围。
Port 0:
=============
Current: 7.530 mAmps
Voltage: 3344.0 mVolts
RX Power: -2.5 dBm (567.5uW)
TX Power: -2.9 dBm (511.6 uW)
Frame unrouted detected错误会显示在errdump日志中。
2024/08/21-20:37:16, [AN-1014], 922785, FID 128, INFO, switcha, Frame unroute detected, tx port 0 rx port 0, sid 7xxxx0, did 70xx0, timestamp 2024-08-21 20:37:16 .
2024/08/21-20:37:40, [AN-1014], 922821, FID 128, INFO, switcha, Frame unroute detected, tx port 0 rx port 0, sid 7xxxx0, did 70xx0, timestamp 2024-08-21 20:37:40 .