跳转到主内容

由于HBA出现故障、无法访问ESXi主机上的卷

Views:
10
Visibility:
Public
Votes:
0
Category:
fas-systems<a>2009年709712.</a>
Specialty:
san
Last Updated:

适用场景

  • FC LUN
  • Brocade 交换机上的端口
  • ONTAP 9.x

问题描述

  • 由于连接问题、FC LUN在主机端丢失访问权限

            lost_volume.jpg

  • IO WQE 在存储端观察到错误、如下所示、在两个节点上均出现错误

Mon Aug 21 23:18:43 +0700 [NETxx-02: fct_tpd_work_thread_0: fcp.io.status:debug]: STIO Adapter:5a IO WQE failure, Handle 0x4, Type 8, S_ID: 49xx00, VPI: 3, OX_ID: 892, Status 0x3 Ext_Status 0x16
Mon Aug 21 23:19:34 +0700 [NETxx-02: fct_tpd_work_thread_0: fcp.io.status:debug]: STIO Adapter:1a IO WQE failure, Handle 0x0, Type 8, S_ID: 49xx00, VPI: 3, OX_ID: 887, Status 0x3 Ext_Status 0x16

  • C3 timeout Tx 在Brocade交换机的ISL端口上观察到错误

/fabos/cliexec/porterrshow :
      frames     enc    crc    crc    too    too    bad    enc   disc   link   loss   loss   frjt   fbsy   c3timeout   pcs    uncor
     tx     rx    in    err    g_eof   shrt   long   eof    out   c3    fail   sync   sig            tx   rx    err    err
  46:   2.1t  558.7g   0     0     0     0     0     0     0    159.6k   5     0    11     0     0   159.5k  0     0    427.4k
  47:   2.1t  558.7g   0     0     0     0     0     0     0    153.9k   6     0    11     0     0   153.9k  0     0     2.0k   

  • Frame timeout detected errrdump下报告的错误指示无法将帧发送到ISL端口 

2023/06/08-11:39:48, [AN-1014], 184556, FID 128, INFO, ssw-bjb-farm-drc-01a, Frame timeout detected, tx port 46 rx port 0, sid 10001, did 490400, timestamp 2023-06-08 11:39:48 .
2023/06/08-11:39:47, [AN-1014], 184536, FID 128, INFO, ssw-bjb-farm-drc-01a, Frame timeout detected, tx port 46 rx port 0, sid 10001, did 490400, timestamp 2023-06-08 11:39:47 .
2023/06/08-11:41:34, [AN-1014], 184637, FID 128, INFO, ssw-bjb-farm-drc-01a, Frame timeout detected, tx port 47 rx port 0, sid 10001, did 490400, timestamp 2023-06-08 11:41:34

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.