ONTAP 升级任务已中止,并出现错误:无法将字段 "vserver" 设置为 "x"
状态信息
适用场景
- ONTAP 9.
- ONTAP升级
问题描述
- 尝试升级ONTAP后、系统显示以下消息:
The upgrade is not complete: an upgrade task aborted. This node is not fully operational. Contact support personnel for the upgrade repair procedure.
- 由于"无法将字段"vServer"设置为"3"、升级任务已中止
cluster1::*> system node upgrade-revert show
Node: cluster1-n1 Status: aborted
Status Message: The upgrade aborted. Contact support personnel for the upgrade repair procedure.
Vers Phase Status Upgrade Phase Status Message
---- ---------- -------- ------------------------------------------------------
700 pre-root applied No upgrade is required for this phase.
700 pre-apps applied Upgrade successful.
700 post-apps aborted failed to set field "vserver" to "3"
(...)
- 没有名为"3"的SVM
cluster1::*> vserver show -vserver 3
Error: Vserver name: Invalid. The Vserver name must begin with a letter or an underscore. Maximum supported length:
41 if Vserver is type "sync-source", 47 otherwise.
- 检查-instanceing输出时出错:
Status Message: The upgrade failed in the "post-apps" phase on task " OpenSSH 8.1 Upgrade/Revert Task".