跳转到主内容

集群加入失败,并显示错误 " 此操作至少需要一个集群接口 " 。

Views:
22
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
core
Last Updated:

状态信息

适用场景

  • ONTAP 9
  • AFF A400/A300/A220
  • FAS8200/FAS8300/FAS8700
  • FAS2700

问题描述

cluster setup 操作步骤无法将节点加入现有集群,并显示以下错误:

Do you want to create a new cluster or join an existing cluster? {create, join}:
join

Step 1 of 3: Join an Existing Cluster
You can type "back", "exit", or "help" at any question.
Enter the cluster network netmask [255.255.0.0]:
Enter the IP address of an interface on the private cluster network from the
cluster you want to join: e3b: [_ionic_lif_macvlan_del:730] VLAN1 not present MAC: 01:00:0c:cc:cc:cc
e3a: [_ionic_lif_macvlan_del:730] VLAN1 not present MAC: 01:00:0c:cc:cc:cc
169.254.23.165
Joining cluster at address 169.254.23.165
Error: At least one cluster interface is required for this operation.
Restarting Cluster Setup

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.