跳转到主内容

集群加入失败,并且集群网络端口上的 MTU 不匹配 或网络交换机

Views:
29
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
core
Last Updated:

适用场景

  • ONTAP 9
  • 新建集群设置

问题描述

尝试将节点加入集群时,在集群设置向导期间返回以下错误:
 

Step 1 of 3: Join an Existing Cluster
You can type "back", "exit", or "help" at any question.


Enter the IP address of an interface on the private cluster network from the
cluster you want to join: 169.254.224.73

Joining cluster at address 169.254.224.73

System checks .........Error: Cluster network RPC communication test from local address xxx.xxx.xxx.xxx to xxx.xxx.xxx.xxx failed with subsequent larger RPC request of size 4096 where size 3072 succeeded. Possible MTU mismatch on cluster network ports or network switch. Reason: f_echo_1: RPC: Timed out; netid=tcp fd=29 TO=5.0s TT=5.001s O=4148b I=0b CN=113/5 VSID=-3 xxx.xxx.xxx.xxx:57939 <-> xxx.xxx.xxx.xxx:7815. Verify the network configuration.

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.