SP show 命令中的状态为 "node-offline" ，但本地节点显示 SP 状态为 "online"

适用于

• ONTAP 9
• 服务处理器 (SP)

问题

• 状态为 ""node-offline in command"sp show 。

示例：

NetApp-FAS2620::> sp show                                 
                               IP           Firmware
Node          Type Status      Configured   Version   IP Address
------------- ---- ----------- ------------ --------- -------------------------
NetApp-FAS2620-01
              SP   online      true         5.2       10.2.65.244
NetApp-FAS2620-02
              -   node-offline
                               -            -         10.2.65.245

• 但本地节点显示 SP 状态为 "inOnline "commandsysconfig -a 。

示例：

        Service Processor          Status: Online
                Firmware Version:   5.2
                Mgmt MAC Address:   00:A0:98:D4:0D:51
                Ethernet Link:      up, full duplex, auto-neg complete
                Using DHCP:         no
        IPv4 configuration:
                IP Address:         10.2.65.245
                Netmask:            255.255.255.0
                Gateway:            10.2.65.201