跳转到主内容

驱动器更换后重复出现 SPARES LOW 警报

Views:
2
Visibility:
Public
Votes:
0
Category:
disk-drives
Specialty:
core
Last Updated:

适用于

  • NetApp 存储系统
  • ONTAP(任何版本)
  • 使用 Advanced Drive Partitioning (ADP) 的系统
  • 磁盘更换方案

问题

  • 更换 ONTAP 节点上的故障驱动器后,每周都会出现以下重复警报:

[:config_thread:callhome.spares.low:error]: Callhome for SPARES_LOW: /_15NVMe_1/plex0/rg0, /_15NVMe_1/plex0/rg

  • 控制器对的磁盘驱动器托架上的琥珀色和绿色 LED 指示灯均已亮起。
  • 驱动器在 ASUPs 和 ONTAP 日志中显示为正常,但 LED 指示灯显示的情况并非如此。
  • 事件日志中未发现任何错误。
  • SPARES_LOW 警报每周六中部标准时间下午 2 点重复出现。
  • 即使重新安装驱动器并多次进行 ASUP 审查,问题仍然存在。

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.