跳转到主内容

由于过度 PHY 更改 DS460C DCM 故障导致主机端口失败警报

Views:
Visibility:
Public
Votes:
0
Category:
not set
Specialty:
not set
Last Updated:

适用于

  • * ONTAP 版本 9.13.1P9
  • * DS460C

问题描述

- HAGroupNotification(HOST_PORT_FAIL-DisabledbyIOM)警报
- DS460C 上的 IOM B 报告为故障,随后 DCM : 严重 02,40,00,00
故障
- 多个温度传感器也显示为:未知



存储故障:https://smartsolve.netapp.com/#cdv?r...25061620520025

机箱状态:正常
通道:0a
机箱:1
机箱类型:DS460-12
产品序列号:952507000969


模块类型:IOM12B



20:未知 06,00,14,00
21:未知 06,00,14,00
22:未知 06,00,14,00
23:未知 06,00,14,00
24:正常 01,00,33,00
25:未知 06,00,14,00
26:未知 06,00,14,00
27:未知 06,00,14,00
28:未知 06,00,14,00


29:正常 01,00,36,00



抽屉控制模块:
元素状态 状态字节 状态描述
1 [IOM12B A]:正常 01,00,01,01 报告,类型 BIT0
2 [IOM12B A]:正常 01,00,01,01 报告,类型 BIT0
3 [IOM12B A]:正常 01,00,01,01 报告,类型 BIT0
4 [IOM12B A]:正常 01,00,01,01 报告,类型 BIT0
5 [IOM12B A]:正常 01,00,01,01 报告,类型 BIT0
6 [IOM12B B]:严重 02,40,00,00 故障
7 [IOM12B B]:严重 02,40,00,00 故障
8 [IOM12B B]:严重 02,40,00,00 故障
9 [IOM12B B]:严重 02,40,00,00 故障


10 [IOM12B B]:正常 01,00,01,01 报告,类型 BIT0


-----------------------------------





机箱名称:0a.shelf1
机箱 ID:1
通道:0a
模块:B
机箱 UID:50:0a:09:80:0e:d5:7f:a4
机箱序列号:952507000969
终端开关:N/A
机箱状态:在线
模块状态:正常

部分路径链路无效 运行丢失 Phy CRC Phy
磁盘端口超时率 DWord 不一致 Dword 重置 错误 变化
编号 状态 值 (ms) (Gb/s) 计数 计数 计数 问题 计数 计数
--------------------------------------------------------------------------------------------------
[HST0/P0:0 ] 正常 0 12.0 0 0 0 0 0 1
[HST1/P0:1 ] 正常 0 12.0 0 0 0 0 0 1
[HST2/P0:2 ] 正常 0 12.0 0 0 0 0 0 1
[HST3/P0:3 ] 未知链路 0 NA 0 0 0 0 0 2
[HST4/P1:0 ] 空 0 NA 0 0 0 0 0 0
[HST5/P1:1 ] 空 0 NA 0 0 0 0 0 0
[HST6/P1:2 ] 空 0 NA 0 0 0 0 0 0
[HST7/P1:3 ] 空 0 NA 0 0 0 0 0 0
[HST8/P2:0 ] 正常 0 12.0 0 0 0 0 0 1
[HST9/P2:1 ] 正常 0 12.0 0 0 0 0 0 1
[HST10/P2:2] 正常 0 12.0 0 0 0 0 0 1
[HST11/P2:3] 正常 0 12.0 0 0 0 0 0 1
[HST12/P3:0] 空 0 NA 0 0 0 0 0 0
[HST13/P3:1] 空 0 NA 0 0 0 0 0 0
[HST14/P3:2] 空 0 NA 0 0 0 0 0 0
[HST15/P3:3] 空 0 NA 0 0 0 0 0 0
[DCM1.0] 未知链路 0 NA 0 0 0 0 0 8
[DCM1.1] 未知链路 0 NA 0 0 0 0 0 8
[DCM1.2] 未知链路 0 NA 0 0 0 0 0 8
[DCM1.3] 未知链路 0 NA 0 0 0 0 0 8
[DCM2.0] 未知链路 0 NA 0 0 0 0 0 8
[DCM2.1] 未知链路 0 NA 0 0 0 0 0 8
[DCM2.2] 未知链路 0 NA 0 0 0 0 0 8
[DCM2.3] 未知链路 0 NA 0 0 0 0 0 8
[DCM3.0] 未知链路 0 NA 0 0 0 0 0 8
[DCM3.1] 未知链路 0 NA 0 0 0 0 0 8
[DCM3.2] 未知链路 0 NA 0 0 0 0 0 8
[DCM3.3] 未知链路 0 NA 0 0 0 0 0 8
[DCM4.0] 未知链路 0 NA 0 0 0 0 0 8
[DCM4.1] 未知链路 0 NA 0 0 0 0 0 8
[DCM4.2] 未知链路 0 NA 0 0 0 0 0 8
[DCM4.3] 未知链路 0 NA 0 0 0 0 0 8
[DCM5.0] 正常 0 12.0 0 0 0 0 0 3
[DCM5.1] 正常 0 12.0 0 0 0 0 0 3
[DCM5.2] 正常 0 12.0 0 0 0 0 0 3


[DCM5.3] 正常 0 12.0 0 0 0 0 0 3

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.

 

  • 这篇文章对您有帮助吗?