FC链路已关闭
适用场景
- ONTAP 9
- Cisco MDS 9148S
问题描述
- Cisco MDS交换机上连接的FC端口已关闭、启用后大约会在一分钟后关闭
- 已验证交换机端SFP和存储控制器目标适配器端口SFP中的缆线是否正确连接
- LIF的网络接口状态为admin
up
、operdown
和status-ExtendedWaiting for link
::> network interface show -data-protocol fcp Logical Status Network Current Current Is Vserver Interface Admin/Oper Address/Mask Node Port Home ----------- ---------- ---------- ------------------ ------------- ------- ---- vs1 lif up/down 20:xx:xx:xx:xx:xx:xx:xx nodename 10c true ::> network interface show -data-protocol fcp -fields status-admin,status-oper,status-extended vserver lif status-oper status-extended status-admin ----------- ------------------ ----------- ----------------- ------------ vs1 lif down Waiting for Link. up
注意:也可以使用 network interface show -data-protocol fcp -fields status-admin,status-oper,status-extended,curr-port
- 确认物理端口状态
::> network fcp adapter show Connection Port Admin Operational Node Adapter Established Address Status Status ------------ ------- ----------- --------- ------- ----------------------- node 10c true 0 up link disconnected
- 报告目标适配器中的SFP无信号电源且超出范围
::> fcp adapter show -instance -node node -adapter 10c [...] Received Optical Power: 0 (uWatts) Is Received Power In Range: false SFP Transmitted Optical Power: 0 (uWatts) Is Xmit Power In Range: false [...]