跳转到主内容

FAS9300节点IfInErrorsWarnAlert在集群端口e0c上收到

Views:
7
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
hw<a>2009981039</a>
Last Updated:

适用场景

  • FAS8300
  • ONTAP 9.9.1
  • 无交换机集群

问题描述

  • EMS报告NodeIfInErrorsWarnAlert。
[node02: nphmd: hm.alert.raised:alert]: Alert Id = NodeIfInErrorsWarnAlert , Alerting Resource = node02/e0c raised by monitor controller .
  • 无交换机配置

Enable Switchless Cluster: true

  • CRC错误正在 增加。

-- interface  e0c  (867 days, 2 hours, 9 minutes, 19 seconds) --

RECEIVE
Total frames:    4313m | Frames/second:    58  | Total bytes:     748g
Bytes/second:    9992  | Total errors:   70055  | Errors/minute:     0
Total discards:    0  | Discards/minute:    0  | Multi/broadcast: 12670k
Non-primary u/c:    0  | Errored frames:    0  | Unsupported Op:    0
CRC errors:    63680 | Runt frames:      0  | Fragment:       44
Long frames:      0  | Jabber:        0  | Length errors:     0
Alignment errors:   0  | No buffer:       0  | Pause:         0
Jumbo:       34546k | Error symbol:    6331  | Bus overruns:     0
Queue drops:      0  | LRO segments:    4252m | LRO bytes:      699g
LRO6 segments:     0  | LRO6 bytes:      0  | Bad UDP cksum:     0
Bad UDP6 cksum:    0  | Bad TCP cksum:     0  | Bad TCP6 cksum:    0
Mcast v6 solicit:   0  | Lagg errors:      0  | Lacp errors:      0
Lacp PDU errors:    0

  • 更换集群缆线后、端口e0c显示关闭。

slot 0: 40G/100G Ethernet Controller CX5
        e0c MAC Address:    d0:39:ea:38:40:4d (auto-unknown-fd-down)
                QSFP Vendor:         Amphenol
                QSFP Part Number:    112-00595
                QSFP Serial Number:  APF20339235667
        e0d MAC Address:    d0:39:ea:38:40:4e (auto-100g_cr4-fd-up)
              QSFP Vendor:         Amphenol
              QSFP Part Number:    112-00595
              QSFP Serial Number:  APF21329435568

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.