跳转到主内容

将 RCF 文件应用于 Cisco Nexus 3132V-Q 集群交换机时出错

Views:
17
Visibility:
Public
Votes:
0
Category:
fabric-interconnect-and-management-switches
Specialty:
hw
Last Updated:

适用场景

  • Cisco Nexus 3132V-Q 集群网络交换机
  • NX-OS 9.3.7
  • RCF1.6 (集群 HA 分支)

问题描述

将 RCF 应用于交换机时出现错误
 
`switch(config)# interface port-channel1`
`switch(config-if)# switchport mode trunk`
`switch(config-if)# spanning-tree port type network`
Warning: Bridge Assurance MUST be enabled at the remotely connected interface
`switch(config-if)# mtu 9216`
`switch(config-if)# no shutdown`
`switch(config-if)# class-map type qos match-all HA`
`switch(config-cmap-qos)# match cos 5 `
`switch(config-cmap-qos)# policy-map type qos HA `
`switch(config-pmap-qos)# class HA`
`switch(config-pmap-c-qos)# set qos-group 5`
`switch(config-pmap-c-qos)# class class-default`
`switch(config-pmap-c-qos)# set qos-group 0`
`switch(config-pmap-c-qos)# policy-map type queuing HA_EGRESS`
Invalid class referenced
% Invalid command at '^' marker.
`switch(config)# class type queuing c-out-8q-q6`
ERROR: Cannot modify system defined queuing class-maps

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.