错误！在BES-53248集群交换机上的RCF升级期间、第XXX行的配置脚本文件中

最后更新
另存为PDF

Views:: 36

Visibility:: Public

Votes:: 0

Category:: ontap-9

Specialty:: hw

Last Updated:

适用场景

ONTAP 9
BES-53248集群交换机。

问题描述

在BES-53248集群交换机上的RC框架升级期间收到以下错误：

interface 0/17-0/24
 An invalid interface range has been used for this function. An interface range must be 1000 characters or less.
 no shutdown
 Command not found / Incomplete command : no shutdown
 Error! in configuration script file at line number 187.
 CLI Command :: no shutdown.
 Aborting script.
 Execution of configuration script 'BES-53248-RCF-v1.12-Cluster-HA.scr' could not be completed.
 WARNING:
 The running configuration may not be the desired configuration. You might want to reload the saved configuration.

从交换机日志中、两个交换机仅使用两个10GbE端口：0/1和0/2和两个100GbE端口：0/55和0/56：

*************** show port all ***************

Admin Physical Physical Link Link LACP Actor Intf Type Mode Mode Status Status Trap Mode Timeout --------- ------ --------- ---------- ---------- ------ ------- ------ -------- 0/1 Enable 10G Full 10G Full Up Enable Enable long 0/2 Enable 10G Full 10G Full Up Enable Enable long 0/3 Enable Auto Down Enable Enable long 0/4 Enable Auto Down Enable Enable long 0/5 Enable Auto Down Enable Enable long 0/6 Enable Auto Down Enable Enable long 0/7 Enable Auto Down Enable Enable long 0/8 Enable Auto Down Enable Enable long 0/9 Enable Auto Down Enable Enable long 0/10 Enable Auto Down Enable Enable long 0/11 Enable Auto Down Enable Enable long 0/12 Enable Auto Down Enable Enable long 0/13 Enable Auto Down Enable Enable long 0/14 Enable Auto Down Enable Enable long 0/15 Enable Auto Down Enable Enable long 0/16 Enable Auto Down Enable Enable long 0/55 PC Mbr Enable Auto 100G Full Up Enable Enable long 0/56 PC Mbr Enable Auto 100G Full Up Enable Enable long