跳转到主内容

将 ONTAP 升级到 9.3 后, EMS 报告 "cmds.sysconf.logErr : notice"

Views:
7
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
hw<a>2009年113164</a><a>用于翻译</a>
Last Updated:

适用场景

ONTAP 9.3

问题描述

  • 在将ONTAP升级到9.3P21后、EMS报告"cmds.sysconf.logErr:note"。
示例:
 
[Node01: sysconfig_periodic_checker: cmds.sysconf.logErr:notice]: sysconfig: slot 1: Number of the Broadcom LPE16004; Quad-Port 16Gb card (PN X1145A) exceeds supported maximum (1). sysconfig: slot 2: Number of the Broadcom LPE16004; Quad-Port 16Gb card (PN X1145A) exceeds supported maximum (1). .
 
  • 已安装X1133A-R6 HBA卡、但ONTAP会 在 sysconfig -ac 命令输出中显示有关X1145A HBA卡的消息。

之前:

sysconfig: slot 1 OK: X1133A: Broadcom LPe16004 rev. A0
sysconfig: slot 2 OK: X1133A: Broadcom LPe16004 rev. A0

将ONTAP升级到9.3之后:

sysconfig: slot 1: Number of the Broadcom LPE16004; Quad-Port 16Gb card (PN X1145A) exceeds supported maximum (1).
sysconfig: slot 2: Number of the Broadcom LPE16004; Quad-Port 16Gb card (PN X1145A) exceeds supported maximum (1).

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.