集群端口 e0a 和 e0b 关闭导致 CLAM 恐慌 - 电源循环无法解决

最后更新
另存为PDF

Views:: 44

Visibility:: Public

Votes:: 0

Category:: fas-systems

Specialty:: hw

Last Updated:

适用于

AFF A300、FAS8200
AFF A200、FAS2650、FAS2620
AFF A220、AFF C190、FAS2750、FAS2720
两个节点集群
已启用连接、活力和可用性监视器 (CLAM)
- ONTAP 9.8 或更高版本
- 使用 SAN 实体配置的集群

问题

集群端口 e0a 和 e0b 关闭，导致一个节点被接管

Tue Oct 03 11:08:31 CEST [node1: ixgbe/e0b: snmp.link.down:info]: Interface 2 is down.

Tue Oct 03 11:08:31 CEST [node1: ixgbe/e0b: netif.linkDown:info]: Ethernet e0b: Link down, check cable.

Tue Oct 03 11:08:31 CEST [node1: ixgbe/e0a: snmp.link.down:info]: Interface 1 is down.

Tue Oct 03 11:08:31 CEST [node1: ixgbe/e0a: netif.linkDown:info]: Ethernet e0a: Link down, check cable.

Tue Oct 03 11:08:32 CEST [node2: ixgbe/e0b: snmp.link.down:info]: Interface 2 is down.

Tue Oct 03 11:08:32 CEST [node2: ixgbe/e0b: netif.linkDown:info]: Ethernet e0b: Link down, check cable.

Tue Oct 03 11:08:32 CEST [node2: ixgbe/e0a: snmp.link.down:info]: Interface 1 is down.

Tue Oct 03 11:08:32 CEST [node2: ixgbe/e0a: netif.linkDown:info]: Ethernet e0a: Link down, check cable.

其中一个节点发生"超出仲裁范围"的恐慌。

PANIC : Received PANIC packet from partner, receiving message is (Coredump and takeover initiated because Connectivity, Liveliness and Availability Monitor (CLAM) has determined this node is out of quorum.

已执行集群端口 e0a 和 e0b 故障导致 CLAM 崩溃中的步骤