跳转到主内容

CFBMC-6985:AFF A90 SP HBT 丢失并在 10 分钟内因 sp.ipmi.lost.shutdown 而停止

Views:
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
hw
Last Updated:

问题描述

  • 节点意外关闭,BMC 状态不确定。示例:

LOADER-B> bmc status
Firmware Version:   UnknownIPv4 Settings
Failed to get IPv4/IPv6 addressing enables: Unknown IPMI completion code.
Failed to get DHCP setting: Unknown IPMI completion code.
   MAC Address:   N/A - Error
   Using DHCP:    Failed to get DHCP setting: Unknown IPMI completion code.
N/A - Error
   IP Address:    Failed to get address: Unknown IPMI completion code.
N/A - Error
   Gateway:     Failed to get gateway: Unknown IPMI completion code.
N/A - Error
   Netmask:     Failed to get netmask: Unknown IPMI completion code.
N/A - Error
*** command status = Error(-1)

  • 从 ONTAP 事件中发现 SP HBT 消息。示例:

cluster::> event log show
... EMERGENCY monitor.shutdown.emergency: Emergency shutdown: Environmental Reason Shutdown (System reboot to recover the SP)
... EMERGENCY sp.ipmi.lost.shutdown: SP heartbeat stopped and cannot be recovered. To prevent hardware damage and data loss, the system will shut down in 10 minutes.
... ALERT     callhome. sp.hbt.stopped: Call home for SP HBT STOPPED
... ERROR     asup.post.drop: AutoSupport message (HA Group Notification from node_name (SP HBT STOPPED) ALERT) was not posted to NetApp. The system will drop the message.
... ERROR     asup.post.drop: AutoSupport message (HA Group Notification from node_name (SP HBT MISSED) NOTICE) was not posted to NetApp. The system will drop the message.

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.