跳转到主内容

由于SNMPv3配置不正确、无法添加存储Brocade交换机

  1. 最后更新
  2. 另存为PDF
Views:
9
Visibility:
Public
Votes:
0
Category:
metrocluster
Specialty:
metrocluster<a>2009年346516</a>
Last Updated:

适用场景

  • MetroCluster
  • Brocade存储交换机

问题描述

  • 尝试添加Brocade交换机时、NetApp集群上的storage switch add命令失败：

CLUSTER01::*> storage switch add -address 53.33.44.137 -snmp-version SNMPv3 -snmp-community-or-username snmpv3user

Error: command failed: Internal error. Failed to add switch for monitoring on node "NODE01" in cluster "CLUSTER01". Reason: Failed to check if device located at "53.33.44.137" is from supported vendor. For further assistance, contact technical support.

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.