初始 MetroCluster IP 安装时的 SwitchIfDead_Alert

最后更新
另存为PDF

Views:

Visibility:: Public

Votes:: 0

Category:: ontap-9

Specialty:: metrocluster

Last Updated:

适用于

ONTAP 9.16.1P9（以及其他 9.16.1Px/9.15.1Px 受影响的版本）
MetroCluster IP 配置
Cisco N9K-C9336C-FX2 群集交换机
AFF-A70（以及其他 FAS/AFF/ASA 系统）
Broadcom 和 Cisco 群集交换机

问题

安装 MetroCluster IP 设置时，您会在大多数和/或所有交换机端口上看到"SwitchIfDead_Alert"。

在集群上报告了以下健康警报：

Node: Node_Name
AlertID: SwitchIfDead_Alert
Resource: Ethernet1/3, Ethernet1/4 (and/or other unused ports)
Severity: Major
IndicationTime: <timestamp>
Suppress: false
Acknowledge: false
ProbableCause: The interface Ethernet1/3 is up, but has not passed unicast traffic for twelve consecutive polling intervals.
PossibleEffect: The lack of transmit or receive traffic reported by the switch can indicate issues with port-level or switch-level data packet forwarding.

集群在 system health alert show 和 system health subsystem show. 中显示为已降级