StorageFCAdapterFault_Alert—解决方案指南

适用场景

• ONTAP 9
• MetroCluster光纤通道
• StorageFCAdapterFault_Alert

问题描述

如果检测到启动程序链路关闭、则会在FC MetroCluster系统上触发StorageFCAdapterFault_Alerts。此警报可能有多种原因。

• 自动通报警报：

[mgwd: callhome.hm.alert.major:alert]: Call home for Health Monitor process nchm: StorageFCAdapterFault_Alert [100000109bxxxxxx].

• MetroCluster_Node子系统运行状况报告已降级：

cluster::>system health subsystem show
Subsystem      Health
----------------- ------------------
SAS-connect     ok
Environment     ok
Memory       ok
Service-Processor ok
Switch-Health    ok
CIFS-NDO      ok
Motherboard     ok
IO         ok
MetroCluster    ok
MetroCluster_Node degraded
FHM-Switch     ok
FHM-Bridge     ok
SAS-connect_Cluster
          ok
13 entries were displayed.

• 运行状况警报报告适配器出现故障：

cluster::>system health alert show
               Node: node-01
           Resource: 4d
           Severity: Major
    Indication Time: Sat Aug 15 13:05:58 2020
           Suppress: false
        Acknowledge: false
     Probable Cause: FC initiator adapter 4d is at fault.
    Possible Effect: Resiliency of backend storage is compromised.
 Corrective Actions: 1. Ensure that the FC initiator link has not been tampered with.
                     2. Verify the operational status of the FC initiator
                     adapter by using the command "system node run -node
                     local -command storage show adapter".

• 事件日志报告：

::>event log show

[slifc_intrd: fci.link.break:error]: Link break detected on Fibre Channel adapter 4d.
[slifc_timeout_3: fci.link.error:error]: Could not recover link on Fibre Channel adapter 4d after 30 seconds. Taking the adapter offline.
[nchmd: hm.alert.raised:alert]: Alert Id = StorageFCAdapterFault_Alert , Alerting Resource = 100000109bxxxxxx raised by monitor node-connect