跳转到主内容

一个或多个节点未连接到两个集群交换机

Views:
2
Visibility:
Public
Votes:
0
Category:
metrocluster
Specialty:
metrocluster<a>2008979909</a><a>翻译</a>
Last Updated:

适用场景

  • MetroCluster
  • Cisco Nexus 
  • 集群交换机  

问题描述

  • 在使用Cisco交换机的MetroCluster IP配置中,即使与交换机的所有连接均已联机,也可能会出现以下HM警报:

    Cluster-A::*> system health alert show
    Node: Node-A1
    Resource: Node-A1
    Severity: Major
    Indication Time: Mon May 10 17:59:20 2021
    Suppress: false
    Acknowledge: false
    Probable Cause: One or more nodes are not connected to both cluster switches.
    Possible Effect: If one cluster switch fails, "Node-A1" might lose
    access to the cluster.
    Corrective Actions: Verify that the switch "Switch_A1" is connected to the node "Node-A1".

  • device-discovery输出中缺少一个交换机:  

    nac11::*> network cdp device-discovery show 
    Node/     Local  Discovered
    Protocol   Port   Device (LLDP: ChassisID)  Interface      Platform
    ----------- ------ ------------------------- ----------------  ----------------
    Node-01   /cdp
           e0a   nac11cs-ccgi-p01(FOC12345HD)
                           Ethernet1/2     N3K-C3232C
           e0b   nac11cs-ccgi-p01(FOC12345HD)                
                           Ethernet1/10    N3K-C3232C    
    ~
    node-02  /cdp
           e0a   nac11cs-ccgi-p01(FOC12345HD)
                           Ethernet1/1     N3K-C3232C
           e0b   nac11cs-ccgi-p01(FOC12345HD)
                           Ethernet1/9 
                                     N3K-C3232C

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.