NVIDIA 2100交换机在MetroCluster配置期间保持关闭状态
适用场景
- ONTAP 9
- MetroCluster
- X1151A SFP适配器
- X1166A SFP适配器
- 操作系统Cumulus Linux 5.4
- NVIDIA SN2100交换机
问题描述
- 将支持的铜缆连接到NVIDIA SN2100交换机和兼容适配器后、由于端口关闭、本地集群设置无法完成：
::> Network port show:
Node: Node01
Speed(Mbps) Health
Port IPspace Broadcast Domain Link MTU Admin/Oper Status
--------- ------------ ---------------- ---- ---- ----- ------ --------
e0M Default - up 1500 auto/1000 -
e0a Default - up 1500 auto/25000 -
e0b Default - up 1500 auto/25000 -
e0e Default - down 1500 auto/auto -
e0f Default - down 1500 auto/auto -
e0g Default - down 1500 auto/auto -
e0h Default - down 1500 auto/auto -
e3a Cluster - down 9000 cars/cars -
e3b Cluster - down 9000 cars/cars -
e4a Default - down 1500 auto/auto -
e4b Default - down 1500 auto/auto -
::> network interface show:
::> net int show
(network interface show)
Logical Status Network Current Current Is
Vserver Interface Admin/Oper Address/Mask Node Port Home
----------- ---------- ---------- ------------------ ------------- ------- ----
Cluster
clus1 up/down 10.0.0.1/16 Node01 e3a true
clus2 up/down 10.0.0.2/16 Node01 e3b true
Default
mgmt1 up/up 10.0.0.5/24 Node01 e0M true