跳转到主内容

MetroCluster IP SinglePathToDiskShelf-警报

Views:
1
Visibility:
Public
Votes:
0
Category:
metrocluster
Specialty:
metrocluster
Last Updated:

适用场景

  • MetroCluster IP
  • ONTAP 9

问题描述

  • system health alert show 具有 SinglePathToDiskShelf_Alert  警报,如下所示
cluster01::> system health alert show
Node: node01
Alert ID: SinglePathToDiskShelf_Alert
Resource: Shelf 1.21
Severity: Major
Indication Time: Fri Jun 28 19:09:46 2024
Suppress: false
Acknowledge: false
Probable Cause: Controller node01 has only a single-path
configuration to disk shelf 1.21. This might occur
when the controller does not have dual-path
configuration to stack 1, a SAS HBA port on the
controller connected to the disk shelf is disabled, or shelf-to-shelf cabling is incorrect.
Possible Effect: Access to disk shelf 1.21 via controller node01 might be lost with a failure of controller 0v port, a
single shelf-to-shelf cable or a single disk shelf IOM.
Corrective Actions: 1. Consult the guide applicable to your IOM12 disk shelf to review cabling rules and complete the SAS cabling worksheet for your system.
2. Connect controller node01 to the first and last disk shelf of stack 1 using active SAS HBA ports.
3. Verify that controller node01 is cabled to IOM A at one end and IOM B at another end of stack 1.
4. If disk shelf 1.21 is located between two disk shelves within stack 1, verify that IOM A and IOM B are properly cabled to their independent domains.
5. Contact technical support if the alert persists.
  • MCDC或交换机输出显示一个网络结构上的ISL端口已关闭。

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.