跳转到主内容

MetroCluster ISL链路无法与X65406收发器一起使用

Views:
4
Visibility:
Public
Votes:
0
Category:
metrocluster
Specialty:
metrocluster
Last Updated:

适用场景

  • ONTAP 9
  • MetroCluster IP
  • X65406 100Gb LwL收发器
  • Cisco后端IP交换机 

问题描述

  • 初始设置系统期间、远程ISO未联机
  • show interface brief 端口的状态为 Link not connected
`show interface brief`

Eth1/15     1    eth  trunk  down  Link not connected    auto(D) 10
  • 交换机未检测到Rx电源:
`show interface transceiver detail`
 
Ethernet1/15
   transceiver is present
   type is QSFP-100G-CWDM4
   name is FINISAR CORP.
   part number is FTLC1157RGPL
Lane Number:1 Network Lane
      SFP Detail Diagnostics Information (internal calibration)
  ----------------------------------------------------------------------------
         Current        Alarms          Warnings
         Measurement   High     Low     High      Low
  ----------------------------------------------------------------------------
  Temperature  46.84 C     75.00 C   -5.00 C   70.00 C     0.00 C
  Voltage     3.26 V     3.63 V    2.97 V    3.46 V     3.13 V
  Current    35.65 mA    77.00 mA   13.00 mA   72.00 mA    18.00 mA
  Tx Power    1.57 dBm    5.49 dBm  -8.01 dBm   2.49 dBm   -4.00 dBm
  Rx Power     N/A     3.49 dBm  -16.02 dBm   2.49 dBm   -12.00 dBm
  • 本地环路返回测试显示链路正在启动
  • 为两个本地交换机布线会使链路启动

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.