跳转到主内容

MetroCluster Flexarray 更换主板后无法看到磁盘

Views:
Visibility:
Public
Votes:
0
Category:
metrocluster
Specialty:
hw
Last Updated:

适用于

  • ONTAP 9
  • MetroCluster 光纤连接(MCC-FC)环境
  • FlexArray

问题描述

  • 在更换 MetroCluster 节点(stor87****2)上的主板后,节点无法看到任何磁盘——无论是本地磁盘还是合作伙伴磁盘——导致以下症状: "无法正常回馈:合作伙伴缺少文件系统磁盘"
  • 节点卡在 initializing/waiting-for-giveback state
  • 合作伙伴节点报告:
    Normal giveback not possible: partner missing filesystem disks
  • 磁盘显示 -v 输出返回 0 个磁盘

       *> disk show -v
             Local System ID: 53****12
             disk show: No disks attached to system.

  • 维护模式:FC 启动器端口(0e/0f)的 sysconfig -v 输出显示:
    slot 0: FC Host Adapter 0e (QLogic 8324 rev. 2, N-port, <UP>)
                    Firmware rev:      8.9.1
                    Flash rev:         5.0.2
                    Host Port Id:      0x12300
                    FC Node Name:      5:00a:09800e:498ac0
                    FC Port Name:      5:00a:09800e:498ac0
                    SFP Vendor:        AVAGO
                    SFP Part Number:   AFBR-XXX-NA1
                    SFP Serial Number: AC1XXX56Y
                    SFP Capabilities:  4, 8 or 16 Gbit
                    Link Data Rate:    16 Gbit
                   Switch Port:       ??
    slot 0: FC Host Adapter 0f (QLogic 8324 rev. 2, N-port, <UP>)
                    Firmware rev:      8.9.1
                    Flash rev:         5.0.2
                    Host Port Id:      0x12300
                    FC Node Name:      5:00a:09810e:498ac0
                    FC Port Name:      5:00a:09810e:498ac0
                    SFP Vendor:        AVAGO
                    SFP Part Number:   AFBR-XXXMZ-NA1
                    SFP Serial Number: AC19XXXX6X
                    SFP Capabilities:  4, 8 or 16 Gbit
                    Link Data Rate:    16 Gbit
                   Switch Port:       ??

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.